Product Manual

SE-601 Series Electrocardiograph User Manual System Setup
- 92 -
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to the ID Hint item in the
Patient Question window, and then press F3 or F4 to select On or Off.
In the AUTO or RHYT mode, when ID Mode is set to Manu and ID Hint is set to On, if you do
not input the patient ID, the hint will pop up to remind you to input the patient ID when you press
the START/STOP key.
9.7.3 Selecting Gender/Height/Weight/BP/Race/Medication/Ward
NO/Doctor/Technician
For SE-601B/C, press Tab or Shift + Tab to move the cursor to an item in the Patient Question
window, and then press F1 or F2 to select On or Off.
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to an item in the Patient
Question window, and then press F3 or F4 to select On or Off.
When Gender, Height, Weight, BP, Race, Medication, Ward NO, Doctor or Technician is set
to On, the items will be displayed in the Patient Information window and printed in the ECG
reports.
When Gender, Height, Weight, BP, Race, Medication, Ward NO, Doctor or Technician is set
to Off, these items will not be displayed in the Patient Information window or printed in the
ECG reports.
9.7.4 Specifying H/W Unit
For SE-601B/C, press Tab or Shift + Tab to move the cursor to the H/W Unit item in the Patient
Question window, and then press F1 or F2 to select cm/kg or inch/lb..
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to the H/W Unit item in the
Patient Question window, and then press F3 or F4 to select cm/kg or inch/lb..
NOTE: When you change the H/W Unit item, the height and weight values in the Patient
Information window will be cleared.
9.7.5 Specifying BP Unit
For SE-601B/C, press Tab or Shift + Tab to move the cursor to the BP Unit item in the Patient
Question window, and then press F1 or F2 to select mmHg or kpa.
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to the BP Unit item in the
Patient Question window, and then press F3 or F4 to select mmHg or kpa.
When BP is set to kpa, two extra edit boxes will be displayed in the Patient Information
window for inputting decimal fraction.