Product Manual

SE-601 Series Electrocardiograph User Manual System Setup
- 91 -
Figure 9-16 SE-601B / SE-601C Patient Question Setup Window
Figure 9-17 SE-601A Patient Question Setup Window
After setup, press Enter to confirm. Then the System Setup screen appears.
For SE-601A, if you press Esc to exit the Patient Question window after setup, a hint will pop
up to prompt you to save these modifications.
9.7.1 Specifying ID Mode
For SE-601B/C, press Tab or Shift + Tab to move the cursor to the ID Mode item in the Patient
Question window, and then press F1 or F2 to select a mode.
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to the ID Mode item in the
Patient Question window, and then press F3 or F4 to select a mode.
You can set ID Mode to Auto, Time or Manu.
When ID Mode is set to Auto, the patient ID can be automatically generated. The patient ID
range is 0~1999, 999, 999.
When ID Mode is set to Time, the patient ID can be automatically generated according to the
time when you press the START/STOP key to print an ECG report.
When ID Mode is set to Manu, you can enter the patient ID manually in the Patient Information
window.
9.7.2 Selecting ID Hint
For SE-601B/C, press Tab or Shift + Tab to move the cursor to the ID Hint item in the Patient
Question window, and then press F1 or F2 to select On or Off.