Manualshelf

Product Manual

ManualsBrandsEdan ManualsCardiology Equipment6-Channel ECG Machine
919293949596979899100
SE-601 Series Electrocardiograph User Manual System Setup
- 90 -
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to the Key Volume item in
the Sound Setup Window, and then press F3 or F4 to select On or Off.
9.6.5 Setting Hint Volume
When the electrocardiograph displays a hint such as Lead Off, Overload, Battery Weak etc., there
is a sound. When Hint Volume is set to Off, there is no hint sound.
For SE-601B/C, press Tab or Shift + Tab to move the cursor to the Hint Volume item in the
Display&Sound Setup window, and then press F1 or F2 to select an option. You can set Hint
Volume to Low, Medium, High or Off.
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to the Hint Volume item in
the Sound Setup Window, and then press F3 or F4 to select On or Off.
9.6.6 Setting QRS Volume
When an R wave is detected, there is a sound to simulate a heartbeat. When QRS Volume is set
to Off, there is no sound when an R wave is detected.
For SE-601B/C, press Tab or Shift + Tab to move the cursor to the QRS Volume item in the
Display&Sound Setup window, and then press F1 or F2 to select an option. You can set QRS
Volume to Low, Medium, High or Off.
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to the QRS Volume item in
the Sound Setup Window, and then press F3 or F4 to select On or Off.
9.6.7 Setting Notification Volume
After a complete ECG wave is printed, the electrocardiograph gives a short sound. When
Notification Volume is set to Off, there is no notification sound.
For SE-601B/C, press Tab or Shift + Tab to move the cursor to the Notification Volume item in
the Display&Sound Setup window, and then press F1 or F2 to select an option. You can set
Notification Volume to Low, Medium, High or Off.
For SE-601A, press F1, F2, Tab or Shift + Tab move the cursor to the Notification Volume item
in the Sound Setup Window, and then press F3 or F4 to select On or Off.
9.7 Patient Question
Press F1, F2, F3, F4, Tab or Shift + Tab to move the cursor to Pat. Question on the System
Setup screen, and then press Enter to open the Patient Question window.