Product Manual

SE-601 Series Electrocardiograph User Manual System Setup
- 89 -
Figure 9-14 SE-601C Display & Sound Setup Window
Figure 9-15 SE-601A Sound Setup Window
After setup, press Enter to confirm. Then the System Setup screen appears.
For SE-601A, if you press Esc to exit the Display&Sound Setup window after setup, a hint will
pop up to prompt you to save these modifications.
9.6.1 Setting Brightness (Only for SE-601B)
Press Tab or Shift + Tab to move the cursor to the Brightness progress bar in the
Display&Sound Setup window, and then press F3 or F4 to adjust the brightness of the LCD
screen. You can set the brightness within 0~20.
9.6.2 Selecting Display Colors (Only for SE-601C)
Press Tab or Shift + Tab to move the cursor to the Display Colors item in the Display&Sound
Setup window, and then press F1 or F2 to select Option1 or Option2.
9.6.3 Selecting Antialising (Only for SE-601B/C)
Press Tab or Shift + Tab to move the cursor to the Antialising item in the Display&Sound Setup
window, and then press F1 or F2 to select Off or On.
When Antialising is set to On, the system will automatically make the waveform smooth.
When Antialising is set to Off, the system will not make the waveform smooth.
9.6.4 Setting Key Volume
When you press keys on the keyboard, the electrocardiograph gives a short sound. When Key
Volume is set to Off, there is no sound when you press keys.
For SE-601B/C, press Tab or Shift + Tab to move the cursor to the Key Volume item in the
Display&Sound Setup window, and then press F1 or F2 to select an option. You can set Key
Volume to Low, Medium, High or Off.