Manualshelf

Product Manual

ManualsBrandsEdan ManualsCardiology Equipment6-Channel ECG Machine
919293949596979899100
SE-601 Series Electrocardiograph User Manual System Setup
- 84 -
9.3.6 Selecting Template
For SE-601B/C, press Tab or Shift + Tab to move the cursor to the Template item in the Record
Setup window, and then press F1 or F2 to select Off or On.
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to the Template item in the
Record Setup window, and then press F3 or F4 to select Off or On.
In the AUTO mode, when Template is set to On, average template will be printed in the ECG
reports.
In the AUTO mode, when Template is set to Off, average template will not be printed in the
ECG reports.
9.3.7 Selecting Measure
For SE-601B/C, press Tab or Shift + Tab to move the cursor to the Measure item in the Record
Setup window, and then press F1 or F2 to select Off or On.
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to the Measure item in the
Record Setup window, and then press F3 or F4 to select Off or On.
In the AUTO mode, when Measure is set to On, the measure information will be printed in the
ECG reports.
In the AUTO mode, when Measure is set to Off, there will be no measure information in the
ECG reports.
9.3.8 Selecting Minnesota Code
For SE-601B/C, press Tab or Shift + Tab to move the cursor to the Minnesota Code item in the
Record Setup window, and then press F1 or F2 to select Off or On.
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to the Minnesota Code item
in the Record Setup window, and then press F3 or F4 to select Off or On.
In the AUTO mode, when Minnesota Code is set to On, Minnesota Code will be printed in the
ECG reports.
In the AUTO mode, when Minnesota Code is set to Off, Minnesota Code will not be printed in
the ECG reports.
9.3.9 Selecting Analysis
For SE-601B/C, press Tab or Shift + Tab to move the cursor to the Analysis item in the Record
Setup window, and then press F1 or F2 to select Off or On.
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to the Analysis item in the
Record Setup window, and then press F3 or F4 to select Off or On.