Product Manual

SE-601 Series Electrocardiograph User Manual System Setup
- 78 -
9.2 Filter Setup
Press F1, F2, F3, F4, Tab or Shift + Tab to move the cursor to Filter on the System Setup
screen, and then press Enter to open the Filter Setup window.
In the Filter Setup window, you can set AC Filter, EMG Filter, DFT Filter, and Lowpass
Filter.
Figure 9-5 SE-601B / SE-601C Filter Setup Window
Figure 9-6 SE-601A Filter Setup Window
After setup, press Enter to confirm. Then the System Setup screen appears.
For SE-601A, if you press Esc to exit the Filter Setup window after setup, a hint will pop up to
prompt you to save these modifications.
9.2.1 Setting AC Filter
For SE-601B/C, press Tab or Shift + Tab to move the cursor to the AC Filter item in the Filter
Setup window. Press F1 or F2 to select Off or On.
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to the AC Filter item in the
Filter Setup window. Press F3 or F4 to select Off or On.
AC Filter suppresses AC interference without attenuating or distorting the ECG signals. Select
On to turn on the function and select Off to turn it off.
9.2.2 Setting EMG Filter
For SE-601B/C, press Tab or Shift + Tab to move the cursor to the EMG Filter item in the Filter
Setup window. Press F1 or F2 to select an option.
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to the EMG Filter item in the
Filter Setup window. Press F3 or F4 to select an option.