Product Manual

SE-601 Series Electrocardiograph User Manual Printing ECG Reports
- 51 -
3. Select the transmission mode. For details on selecting the transmission mode, please see
Section 8.2.1, “Transmitting Files Through the Serial Port”.
4. Log into the Smart ECG Viewer software.
5. In the AUTO or RHYT mode, ECG data will be transmitted through the serial port
automatically after an ECG report is printed out.
7.5.2 Transmitting ECG Data through the Net Port
1. Connect the PC to the electrocardiograph with an Ethernet cable recommended by the
manufacturer. If the wireless AP transmission is used, connect the PC to one wireless AP, and
connect the electrocardiograph to the other wireless AP. Only the wireless AP recommended
by the manufacturer can be used.
2. Set the transmission mode and the IP address. For details on setting the transmission mode
and the IP address, please see Section 8.2.2, “Transmitting Files Through the Net Port”.
3. Log into the Smart ECG Viewer software.
4. In the AUTO or RHYT mode, ECG data will be transmitted through the net port
automatically after an ECG report is printed out.
7.6 Copy Printing
In the AUTO mode, pressing the 1mV/Copy key can print the ECG report which was printed
out last time. Pressing the START/STOP key can stop printing the ECG report.
NOTE: After an ECG report is printed out in the AUTO mode, if you press the function
key or the MODE key, no copy printing can be carried out until the next ECG
report is printed in the AUTO mode.