Product Manual

SE-601 Series Electrocardiograph User Manual Operation Preparations
- 34 -
1. Connecting the Patient Cable to the Electrocardiograph
Connect the patient cable to the patient cable socket on the right side of the main unit, and then
secure them with two screws.
2. Connecting the Patient Cable to Electrodes
Align all lead wires of the patient cable to avoid twisting, and connect the lead wires to the
electrodes or the alligator clips. Firmly attach them.
4.5 Attaching Electrodes to the Patient
The identifiers and color codes of electrode connectors used comply with IEC/EN requirements.
In order to avoid incorrect connection, the identifiers and color codes are specified in Table 4-1.
Moreover the equivalent code according to American requirements is given in Table 4-1 too.
Table 4-1 Electrode Connectors and Their Identifiers and Color Codes
European American
Electrode Connectors Identifier Color Code Identifier Color Code
Right arm R Red RA White
Left arm L Yellow LA Black
Right leg N or RF Black RL Green
Left leg F Green LL Red
Chest 1 C1 White/Red V1 Brown/Red
Chest 2 C2 White/Yellow V2 Brown/Yellow
Chest 3 C3 White/Green V3 Brown/Green
Chest 4 C4 White/Brown V4 Brown/Blue
Chest 5 C5 White/Black V5 Brown/Orange
Chest 6 C6 White/Violet V6 Brown/Violet
Connecting to
Electrocardiograph
Screw
Main Cable
Connecting to
Electrodes
Lead Wires