Product Manual

SE-601 Series Electrocardiograph User Manual About SE-601 Application
- 24 -
On the main screen3, you can print the previous ECG report again according to the set style,
paper speed and gain which are shown on the bottom of the screen. Pressing the function key F3
can switch the auto style, pressing the function key F4 can switch the paper speed, and pressing
the function key F5 can switch the gain.
To Select the Next Patient Function
When the main screen2 is displayed, press the function key F1 below Setup to open the System
Setup screen.
Press F1, F2, F3, F4, Tab or Shift + Tab to move the cursor to Pat. Question on the System
Setup screen, and then press Enter to open the Patient Question window.
For SE-601B/C, press Tab or Shift + Tab to move the cursor to the Next Patient item, and then
press F1 or F2 to select On.
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to the Next Patient item, and
then press F3 or F4 to select On.
3.5 About the System Setup Screen
When the main screen1 is displayed, press the function key F5 below to open the
main screen2. When the main screen2 is displayed, press the function key F1 below Setup to
open the System Setup screen.
Figure 3-7 SE-601B / SE-601C System Setup Screen
Figure 3-8 SE-601A System Setup Screen
On the System Setup screen, press F1, F2, F3, F4, Tab or Shift + Tab to move the cursor to a
button, and then press Enter to open the setup window related to the button.