Product Manual

SE-601 Series Electrocardiograph User Manual Introduction
- 17 -
WARNING
3. Only qualified service engineers authorized by the manufacturer can open the battery
compartment and replace the battery, and batteries of the same model and
specification must be used.
4. Only when the device is off can the battery be installed or removed.
NOTE: If the battery has not been used for two months or more, you should recharge it
before using it again.
2) Fuse
There is a fuse installed on the bottom of the main unit. The specification is T1AL250VP Ø5×20.
WARNING
Ruptured fuse must only be replaced with that of the same type and rating as the original.
2.6 Function Features
♦ Low weight and compact size
♦ Multi-language support
♦ ECG signals of 12 leads are gathered and amplified simultaneously, 6-channel waves
are displayed and recorded simultaneously
♦ High resolution thermal recorder, recording frequency response ≤150Hz
♦ Flexible printing formats
♦ Full alphanumeric keyboard
♦ The auto, manual, rhythm, and R-R modes are optional
♦ Convenient operation of system setup and file management
♦ Measurement function and interpretation function are optional
♦ Hint information of lead off, lack of paper and low battery capacity etc.
♦ Battery with large capacity
♦ Automatic baseline adjustment for optimal printing
♦ Supporting real-time sampling, pre-sampling, period sampling and arrhythmia
triggering sampling
♦ LCD backlight and the device can be turned off automatically according to the set time
♦ The patient information to be printed is optional
♦ ECG data can be transmitted to the PC software through the serial cable, net cable, or
wireless AP (optional).