Product Manual

SE-601 Series Electrocardiograph User Manual Cleaning, Care and Maintenance
- 107 -
Dirty and soiled thermal print head will deteriorate the printing definition. So it should be cleaned
at least once a month regularly.
CAUTION
Prevent the detergent from seeping into the main unit while cleaning. Do not immerse the
unit or the patient cable into liquid under any circumstances.
13.2 Disinfection
Disinfection of the main unit is not necessary need in daily maintenance, it is only
necessary in operating room. In that case, please use hospital standard disinfectant.
NOTE: Clean and disinfect the chest and limb electrodes after each use.
CAUTION
1. Do not use high-temperature, high-pressure vapour or ionizing radiation as
disinfection methods.
2. Do not use chloric disinfectant such as chloride, sodium hypochlorite etc.
13.3 Care and Maintenance
CAUTION
Operate the electrocardiograph, charge the battery, and store the battery at a
temperature of 40℃(104ºF) or lower. Exposure to higher or lower temperature may
reduce battery life, damage the battery, and degrade overall electrocardiograph
performance.
13.3.1 Recharge and Replacement of Battery
1) Capacity Identification
Current capacity of the battery can be identified according to the battery symbol in the top right
corner of the LCD screen.
: Full capacity
: Capacity is low, and recharge should be taken into account.
: Empty