Product Manual

SE-601 Series Electrocardiograph User Manual System Setup
- 94 -
When Prompt is set to Reviewed by, if Doctor in the Patient Question window is set to On, and
the doctor name is input in the Patient Information window, Report Reviewed by and the
doctor’s name is printed on the bottom of ECG reports.
When Prompt is set to Unconfirmed Report, Unconfirmed Report is printed on the bottom of
ECG reports, and doctor name will not be printed on the bottom of ECG reports.
9.7.8 Inputting Extra Question
Press Tab or Shift + Tab to move the cursor to the Extra Question textbox in the Patient
Question window, and then manually input extra information such as Tel, which will be
displayed in the Patient Information window.
9.8 Date & Time Setup
NOTE: Please set DATE&TIME correctly when it's the first time you use the
electrocardiograph.
WARNING
We recommend that the electrocardiograph should be working on AC power supply at
least 8 hours per month to avoid DATE&TIME missing.
Press F1, F2, F3, F4, Tab or Shift + Tab to move the cursor to Date & Time on the System
Setup screen, and then press Enter to open the Date&Time Setup window.
In the Date&Time Setup window, you can set Current Date, Current Time, Date Mode, Time
Mode, Period Interval, Period Duration, Power Off and LCD Off.
Figure 9-20 SE-601B / SE-601C Date&Time Setup Window
Figure 9-21 SE-601A Date&Time Setup Window
After setup, press Enter to confirm. Then the System Setup screen appears.