Product Manual

SE-601 Series Electrocardiograph User Manual System Setup
- 93 -
9.7.6 Selecting Next Patient
For SE-601B/C, press Tab or Shift + Tab to move the cursor to the Next Patient item in the
Patient Question window, and then press F1 or F2 to select Off or On.
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to the Next Patient item in
the Patient Question window, and then press F3 or F4 to select Off or On.
When Next Patient is set to On, in the AUTO mode, press the START/STOP key to print an
ECG report, and the system will automatically open the main screen3 after a complete ECG
report is printed.
Figure 9-18 SE-601B / C Main Screen3
Figure 9-19 SE-601A Main Screen3
On the main screen3, pressing the function key F1 below Same can return to the main screen1,
all the patient information will keep the same; pressing the function key F2 below Next can
return to the main screen1, all the patient information will be cleared, and the patient ID will be
refreshed; pressing the function key F3 can switch the auto style, pressing the function key F4
can switch the paper speed, and pressing the function key F5 can switch the gain.
On the main screen3, you can print the previous ECG report again, according to the settings of
the auto style, speed and gain which are shown on the bottom of the screen.
When Next Patient is set to Off, in the AUTO mode, the system will not display the main
screen3 after a complete ECG report is printed.
9.7.7 Setting Prompt
For SE-601B/C, press Tab or Shift + Tab to move the cursor to the Prompt item in the Patient
Question window, and then press F1 or F2 to select Reviewed by or Unconfirmed Report.
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to the Prompt item in the
Patient Question window, and then press F3 or F4 to select Reviewed by or Unconfirmed
Report.