Product Manual

SE-1200 Series Electrocardiograph User Manual Transmitting ECG Data Automatically
- 90 -
4. In the auto or rhythm mode, ECG data will be automatically exported to the directory of
ECGDATA\ECG-X\Store\Examination Date of the U disk after an ECG report is printed out.
In the off mode, ECG data will be automatically exported to the directory of
ECGDATA\ECG-X\Store\Examination Date of the U disk after the START/STOP key is
pressed.
NOTE: X can be set in the Device No. textbox in the Transmission Setup window.
9.3 Real-time Transmission to PC ECG
NOTE: For the real-time transmission, the PC ECG software of the manufacturer must
be installed in the PC.
1. Run the PC ECG software and configure it for the real-time transmission.
Double-click on the shortcut icon on the desktop to start up the PC ECG software.
Click on the System Setting button to open the System Setting window. Click on the Device
tab. Select SE serial Machine from the Sampling Device pull-down list on the device setup
window. After setup, click on the OK button to confirm.