Product Manual

SE-1200 Series Electrocardiograph User Manual Transmitting ECG Data Automatically
- 89 -
3) Log into the FTP receiving software. The FTP port is 21.
4) In the auto or rhythm mode, ECG data will be transmitted through the net cable
automatically after an ECG report is printed out. In the off mode, ECG data will be
transmitted through the net cable automatically after the START/STOP key is pressed.
9.2 Exporting ECG Data to the U Disk Automatically
1. Insert the U disk recommended by the manufacturer to USB socket 2 of the
electrocardiograph.
2. When the main screen is displayed, press the function key F6 below Setup to open the System
Setup screen. Press Tab or Shift + Tab, or the Up, Down, Left or Right arrow to move the
cursor to File, press to open the File Setup window.
3. Press Tab or Shift + Tab to move the cursor to the Auto Save list box, and then press the Up
or Down arrow to select On. Press Tab or Shift + Tab to move the cursor to the Saving Path
list box, and then press the Up or Down arrow to select U Disk. Press Tab or Shift + Tab to
move the cursor to File Format, and then press the Up or Down arrow to select
DAT/SCP/FDA-XML/PDF. For details on activating SCP/FDA-XML/PDF function on the
Advanced Setup screen, refer to Section 9.1.3, “Transmitting ECG Data in
SCP/FDA-XML/PDF Format Through Net Cable”.
Press , or press Tab or Shift + Tab to move the cursor to the OK button, and then press
. When the System Setup screen is displayed, press ESC to return to the main screen.