Product Manual

SE-1200 Series Electrocardiograph User Manual Transmitting ECG Data Automatically
- 88 -
3) Press Tab or Shift + Tab to move the cursor to the Activate button after the function to
be activated. Press to open the Activate Password window. Enter the
password and press to activate the function.
NOTE: Please contact local distributors to get the service password and the activating
password.
2. Set file format to SCP/FDA-XML/PDF
When the main screen is displayed, press the function key F6 below Setup to open the System
Setup screen. Press Tab or Shift + Tab, or the Up, Down, Left or Right arrow to move the
cursor to File, press to open the File Setup window. Press Tab or Shift + Tab to
move the cursor to File Format, and then press the Up or Down arrow to select a format.
3. Transmit ECG data in SCP/FDA-XML/PDF format through the net cable
1) Connect the electrocardiograph to the network of the PC with an Ethernet cable
recommended by the manufacturer.
If the wireless AP transmission is used, connect the PC to the server wireless AP, and
connect the electrocardiograph to the client wireless AP. Only the wireless AP
recommended by the manufacturer can be used.
2) Input the correct FTP path, FTP user name and password. Set Auto Transmission to On
and Transmission Mode to Ethernet. Set the IP addresses. For details, please refer to
Section 9.1.2, “Transmitting ECG Data in DAT Format Through Net Cable”.