Product Manual

SE-1200 Series Electrocardiograph User Manual Transmitting ECG Data Automatically
- 83 -
Figure 9-1 RS232-USB Assembly
3. Set Auto Transmission to On and Transmission Mode to UART in the Transmission Setup
window.
1) When the main screen is displayed, press the function key F6 below Setup to open the
System Setup screen.
2) Press Tab or Shift + Tab, or the Up, Down, Left or Right arrow to move the cursor to
Transmission, press
to open the Transmission Setup window.
3) Press Tab or Shift + Tab to move the cursor to the Auto Transmission list box, and then
press the Up or Down arrow to select On. Press Tab or Shift + Tab to move the cursor to
the Transmission Mode list box, and then press the Up or Down arrow to select UART.
4) Press
, or press Tab or Shift + Tab to move the cursor to the OK button, and
then press .
5) Press ESC to return to the main screen.
4. Log into the Smart ECG Viewer software.