Product Manual

SE-1200 Series Electrocardiograph User Manual Transmitting ECG Data Automatically
- 82 -
Chapter 9 Transmitting ECG Data
Automatically
9.1 Transmitting ECG Data to the PC
NOTE:
1. To transmit ECG data in DAT format to the PC, the Smart ECG Viewer software of the
manufacturer must be installed in the PC. You should log into the Smart ECG Viewer
software before transmission.
2. To transmit ECG data in SCP/FDA-XML/PDF format to the PC, the FTP receiving
software must be installed in the PC. You should log into the FTP receiving software
before transmission.
3. By default, the ECG file format is DAT. You can activate SCP/FDA-XML/PDF function
on the Advanced Setup screen For details, refer to Section 9.1.3, “Transmitting ECG
Data in SCP/FDA-XML/PDF Format Through Net Cable”.
9.1.1 Transmitting ECG Data in DAT Format through Serial Cable
1. Connect the RS232 socket of the PC to the RS232 socket of the electrocardiograph with an
RS232 cable.
2. Or if the PC has no RS232 socket, connect the USB socket of the PC to the RS232 socket of
the electrocardiograph by using the RS232-USB assembly.