Product Manual

SE-1200 Series Electrocardiograph User Manual Printing ECG Reports
- 59 -
After setup, press ESC to return to the main screen.
2. When the main screen is displayed, press the MODE key to select the auto mode. Press F3 to
select a paper speed. Press F4 to switch the gain. Press F5 to set the EMG filter or the
Lowpass filter.
3. Press the START/STOP key to print an ECG report. It will stop automatically after printing
a complete ECG report of 12 leads. Or press the START/STOP key again to stop printing the
report.
4. If Preview is set to On in the Work Mode Setup window, press the START/STOP key to
display the preview screen.
Figure 8-1 Waveform Preview Screen