Product Manual

SE-1200 Series Electrocardiograph User Manual Entering Patient Information
- 48 -
3) Press Tab or Shift + Tab to move the cursor to ID Mode, and then press the Up or Down
arrow to select Manual.
4) Press , or press Tab or Shift + Tab to move the cursor to the OK button, and then
press .
5) Press ESC to return to the main screen.
6) Press the function key F1 below Patient to open the Patient Information window. Press
Tab or Shift + Tab to move the cursor. When the cursor is in the ID textbox, enter the
patient ID manually.
7) Press
, or press Tab or Shift + Tab to move the cursor to the OK button, and then
press
.
NOTE: In the auto, rhythm or off mode, when ID Mode is set to Manual and ID Hint is set
to On, if you do not input the patient ID before pressing the START/STOP key, a
hint will pop up to remind you to input the patient ID.
6.2 Entering Other Information
When the main screen is displayed, press the function key F1 below Patient to open the Patient
Information window.