Product Manual

SE-1200 Series Electrocardiograph User Manual Operation Preparations
- 36 -
5) Press down the recorder casing firmly.
6) To select Paper Marker.
Press on the keyboard to turn on the unit. After the main screen is displayed, press
the function key F6 below Setup to display the System Setup screen. Press Tab or Shift
+ Tab, or the Up, Down, Left or Right arrow to move the cursor. When the cursor is on
Record Info on the System Setup screen, press to open the Record Info
Setup window. Press Tab or Shift + Tab to move the cursor to the Paper Marker list
box, and then press the Up or Down arrow to highlight No or Yes. Press to
confirm, and then the System Setup screen appears. Press ESC to return to the main
screen.
7) Advance the recorder paper.
When the main screen is displayed, if Paper Marker is set to Yes , you can press
to advance the recorder paper to the next black marker; if Paper Marker is
set to No, you can press to advance the paper for 2.5cm. Press
again to stop advancing the paper.
Loading/Replacing Process of Rolled Paper:
1) Press the casing button downwards and remove the casing to open the recorder.
2) Take out the paper roller, and remove remainder paper from the roller if necessary.
3) Take off the wrapper of the new thermal paper roll, and then put the paper roll through
the roller.