Product Manual

SE-1200 Series Electrocardiograph User Manual Operation Preparations

- 34 -

4.2 Loading/Replacing Recorder Paper

Two kinds of recorder paper can be used. One is the folded thermal paper, and the other is the

rolled thermal paper.

NOTE:

1. When the folded thermal paper is used, the paper roller is unnecessary and must be

taken out.

2. When using the paper of 216mm in width, the two movable parts should be removed.

3. The exit edge can help you tear the recorder paper.

CAUTION

Make sure that the recorder paper, especially the rolled paper, is installed in the center of

the recorder, and the paper edge is parallel with the casing edge in the direction of

advancing paper, in order to avoid paper deviation or damage to the paper edge.

When the recorder paper runs out or is not loaded, the hint message No Paper will appear on the

screen. Then you should load or replace the recorder paper immediately.

Movable

Part 2

Movable

Part 1

Casing Button

Paper Tray

Groove

Paper Roller

Casing

Exit

Exit Edge

(Edge for

tearin

)