Product Manual

SE-1200 Series Electrocardiograph User Manual About the Electrocardiograph Application
- 27 -
N Gain
Gain: 2.5 mm/mV, 5 mm/mV, 10 mm/mV, 20 mm/mV, 10/5
mm/mV or AGC
NOTE: This setup can’t be saved if it is modified on the main
screen.
O Speed
In the manual mode, you can set Speed to 5mm/s, 6.25mm/s,
10mm/s, 12.5mm/s, 25mm/s or 50mm/s. In the auto and rhythm
modes, only 25mm/s and 50mm/s are available. In the R-R
analysis mode, only 25mm/s is available.
NOTE: This setup can’t be saved if it is modified on the main
screen.
P
Freeze
Freezing ECG waves. For details, please refer to Chapter 7,
“Freezing ECG Waves”.
Q
Patient
Press the function key F1 below Patient to open the Patient
Information window. For details, please refer to Chapter 6,
“Entering Patient Information”.
R
ECG waveform
Display ECG waveform
3.5 About the System Setup screen
When the main screen is displayed, press the function key F6 below Setup to display the System
Setup screen.
NOTE: If you set the system password in the System Maintenance window, you need
enter the password before opening the System Setup screen. For details, refer
to Section 11.10.7, “Setting System Password”.