Product Manual

SE-1200 Series Electrocardiograph User Manual About the Electrocardiograph Application
- 26 -
Name Explanation
A Name
Patient Name: within 60 ASCII characters or the equivalent
number of other characters that can be supported by equivalent
memory used by 60 ASCII characters
B ID
When ID Mode is set to Manual, the patient ID is within 30
ASCII characters.
When ID Mode is set to Auto, the patient ID is 0~1999, 999, 999.
When ID Mode is set to Time, the patient ID is within 10
characters.
C Age
Patient Age
The patient age value and the age unit can be set in the Patient
Information window.
D
Gender
Patient Gender (Male/Female/Empty)
E
Hint Information 1
Including DEMO, Module Error, Overload, Lead Name (When the
leads are off, the lead names will be shown in black on a yellow
background in SE-1200 Express, while in SE-1200, they will be
shown in black on a white background.)
F
Hint Information 2
Including No Paper, Paper Error, Battery Weak, Sampling,
Analyzing, Recording, Testing, Learning, Transmitting, Transmit
Fail, Detecting, Memory Full, U Disk, USB Printer, Lead Off, USB
Scanner
G
Work Mode
Manual, Auto, Rhythm, R-R Analysis or Off
H
Heart Rate
Actual Heart Rate
I
Current Time
Current examination time. Refer to Section 11.8.1, “Setting Date
and Time”.
J
Battery Symbol
Identify the current capacity of the battery
K
File
Press the function key F7 below File to open the File Manager
screen. For details, please refer to Chapter 10, “Managing Files”.
L
Setup
Press the function key F6 below Setup to display the System
Setup screen. For details, please refer to Chapter 11, “System
Setup”.
M
Filter
EMG Filter: 25Hz, 35Hz or 45Hz
Lowpass Filter: 75Hz, 100Hz or 150Hz
NOTE: This setup can’t be saved if it is modified on the main
screen.