Product Manual

SE-1200 Series Electrocardiograph User Manual Introduction
- 13 -
Press Shift and a number key to input the special character
in the top right corner of the key.
If Caps Lock is set to Off, pressing Shift + P can type a
capital P.
If Caps Lock is set to On, pressing Shift + P can type a
lowercase p.
H Esc/Reset
Canceling operation
NOTE: A large polarization voltage may cause
baseline drift. On the main screen, pressing
the ESC key can decrease the polarization
voltage and draw the baseline to zero quickly.
I Power On/Off Power-on/Power-off
J MODE
Press this key to select a working mode among the auto,
manual, rhythm, R-R analysis, and off modes.
NOTE: Only if a working mode is ticked in the Work
Mode Setup window, can the working mode
be selected by pressing the MODE key when
the main screen is displayed.
K SLEEP/WAKE UP Resting/wakening the electrocardiograph
L COPY
In the auto mode, pressing the Copy key can print the
ECG report which was printed out last time.
M START/STOP Start/Stop printing reports
N Arrow Keys
Moving the cursor (Up, Down, Left, Right)
In the manual mode, press the Up or Down arrow to
switch the lead groups.