Product Manual

SE-1200 Series Electrocardiograph User Manual System Setup
- 141 -
11.11.1 Entering Institution
Press Tab or Shift + Tab to move the cursor to the Institution textbox on the Other Setup
Window, and then manually input the institution name within 40 ASCII characters.
NOTE: The total number of supported characters may be fewer if either special Latin
characters or Chinese characters are entered.
11.11.2 Selecting a Language
Press Tab or Shift + Tab to move the cursor to Language on the Other Setup Window, and then
press the Up or Down arrow to highlight a language.
11.11.3 Selecting Caps Lock
Press Tab or Shift + Tab to move the cursor to Caps Lock on the Other Setup Window, and
then press the Up or Down arrow to highlight Off or On.
When Caps Lock is set to On, the letters entered will be capital. Pressing Shift and a
letter key can input a lowercase letter.
When Caps Lock is set to Off, the letters entered will be lowercase. Pressing Shift
and a
letter key can input a capital letter.
11.11.4 Setting External Input
Press Tab or Shift + Tab to move the cursor to the External Input list box on the Other Setup
Window, and then press the Up or Down arrow to highlight Off or On.
The extern input socket is equipped in the electrocardiograph, through which the
electrocardiograph can receive signals from the external equipment.
NOTE: When External Input is set to On, the touch screen becomes ineffective, and
then you should operate the device by using the keyboard.