Product Manual

SE-1200 Series Electrocardiograph User Manual System Setup
- 134 -
11.10.2 Loading System Settings from U Disk
1. Connect the U disk containing the system settings to the electrocardiograph.
2. Press Tab or Shift + Tab to move the cursor to the Load Settings From U disk button in the
System Maintenance window, and then press to load the system settings from the
U disk to the electrocardiograph.
11.10.3 Backing Up Settings
Press Tab or Shift + Tab to move the cursor to the Back up Settings button in the System
Maintenance window, and then press to back up the system settings to the ECG.
11.10.4 Loading Backup Settings
Press Tab or Shift + Tab to move the cursor to the Load Backup Settings button in the System
Maintenance window, and then press to load the backup settings from the ECG.
11.10.5 Printing System Settings
Press Tab or Shift + Tab to move the cursor to the Record System Settings button in the System
Maintenance window, and then press
to print the system settings. Pressing this button
again can stop printing system settings.
11.10.6 Loading Factory Settings
Press Tab or Shift + Tab to move the cursor to the Load Factory Settings button in the System
Maintenance window, and then press to restore the factory settings shown in the
following table.