Product Manual

SE-1200 Series Electrocardiograph User Manual System Setup
- 126 -
In the R-R analysis mode, the R-R analysis report of the rhythm lead selected in the Rhythm
Lead1 list box will be printed.
11.6.2 Setting Lead Sequence
Press Tab or Shift + Tab to move the cursor to the Lead Sequence list box in the Lead Setup
window, and then press the Up or Down arrow to highlight Standard or Cabrera.
Lead Sequence Lead group 1 Lead group 2 Lead group 3 Lead group 4
Standard
І, II, Ш aVR, aVL, aVF V1, V2, V3 V4, V5, V6
Cabrera
aVL, І, -aVR II, aVF, Ш V1, V2, V3 V4, V5, V6
11.6.3 Selecting Nehb
Press Tab or Shift + Tab to move the cursor to the Nehb list box in the Lead Setup window, and
then press the Up or Down arrow to highlight Off or On.
Lead Sequence: I, II, III, ND, NA, NI
NOTE: If you set Nehb to On, the working mode is fixed to be manual.
11.7 Display&Sound Setup
Press Tab or Shift + Tab, or the Up, Down, Left or Right arrow to move the cursor. When the
cursor is on Display&Sound on the System Setup screen, press to open the
Display&Sound Setup window.
After setup, press to confirm, or press Tab or Shift + Tab to move the cursor to the
OK button, and then press to confirm. Then the System Setup screen appears.