Product Manual

SE-1200 Series Electrocardiograph User Manual System Setup
- 123 -
11.5.2 Selecting Auto Transmission
Press Tab or Shift + Tab to move the cursor to Auto Transmission, and then press the Up or
Down arrow to select On or Off.
When Auto Transmission is set to On, in the auto or rhythm mode, ECG data will be transmitted
automatically after an ECG report is printed out; in the off mode, ECG data will be transmitted
automatically after the START/STOP key is pressed.
11.5.3 Selecting Transmission Mode
Press Tab or Shift + Tab to move the cursor to Transmission Mode, and then press the Up or
Down arrow to highlight Ethernet or UART.
When Transmission Mode is set to Ethernet, first connect the net port of the electrocardiograph
to the net port of the PC by using an Ethernet cable recommended by the manufacturer. Then set
all the items in the Transmission Setup window. In the auto, rhythm or off mode, ECG data can
be transmitted through the net cable automatically.
When Transmission Mode is set to UART, first connect serial port 1 of the electrocardiograph to
the serial port of the PC by using a serial cable recommended by the manufacturer. In the auto,
rhythm or off mode, ECG data can be transmitted through the serial cable automatically.
11.5.4 Setting FTP Information
To Enter FTP Path, FTP User Name and Password
Press Tab or Shift + Tab to move the cursor to the FTP Path, FTP User Name, and Password
textboxes, and then fill in these textboxes.
11.5.5 Setting IP Addresses
To Set Server IP
Set the Server IP item to the IP of the PC.