Product Manual

SE-1200 Series Electrocardiograph User Manual System Setup
- 121 -
11.4.8 Setting the Time to Clear Patient Information
Press Tab or Shift + Tab to move the cursor to Patient Info Cleared in the Patient Information
Setup window. Press the Up or Down arrow to highlight an option.
If Patient Info Cleared is set to After Recording, the patient information will be cleared after
the ECG report is printed out.
If Patient Info Cleared is set to After Recording And Lead Off, the patient information will be
cleared after the ECG report is printed out and all the leads are off.
NOTE: This function is unavailable in the manual mode.
11.4.9 Inputting Customized Information
Press Tab or Shift + Tab to move the cursor to the User Defined textbox in the Patient
Information Setup window, and then manually input customized information such as Address,
which will be displayed in the Patient Information window.
11.5 Transmission Setup
NOTE:
1. To transmit ECG data in DAT format to the PC, the Smart ECG Viewer software of the
manufacturer must be installed in the PC. You should log into the Smart ECG Viewer
software before transmission.
2. To transmit ECG data in SCP/FDA-XML/PDF format to the PC, the FTP receiving
software must be installed in the PC. You should log into the FTP receiving software
before transmission.
Press Tab or Shift + Tab, or the Up, Down, Left or Right arrow to move the cursor. When the
cursor is on Transmission on the System Setup screen, press to open the
Transmission Setup window.