Product Manual

SE-1200 Series Electrocardiograph User Manual System Setup
- 120 -
When BP Unit is set to kpa, two extra edit boxes will be displayed in the Patient Information
window for inputting decimal fraction.
11.4.7 Selecting Next Patient
Press Tab or Shift + Tab to move the cursor to Next Patient in the Patient Information Setup
window. Press the Up or Down arrow to highlight Off or On.
When Next Patient is set to On, in the auto mode, press the START/STOP key to print an ECG
report, and the system will automatically open the next patient screen after a complete ECG
report is printed.
On the next patient screen, pressing the function key F1 below Same Patient can return to the
main screen, all the patient information will keep the same; pressing the function key F2 below
Next Patient can return to the main screen, all the patient information will be changed except
gender; pressing F3 can switch the auto recording style; pressing F4 can switch the paper speed,
and pressing F5 can switch the gain. Press the START/STOP key to print the previous ECG
report again, according to the settings of the auto style, speed and gain which are shown on the
bottom of the screen.
When Next Patient is set to Off, in the auto mode, the system will not automatically display the
next patient screen after a complete ECG report is printed.