Product Manual

SE-1200 Series Electrocardiograph User Manual System Setup
- 117 -
Auto Record Info includes Patient Info, Position Marker, Analysis, Template, Measure,
Minnesota Code and Baseline Adjustment.
When Patient Info, Position Marker, Analysis, Template, Measure or Minnesota Code is
selected, it will be printed in the ECG reports.
When Baseline Adjustment is set to Auto, the baselines of the lead groups are adjusted
respectively.
When Baseline Adjustment is set to Horizontal, the baselines of the lead groups are adjusted
simultaneously, and the baselines of the leads in the same row are on the same line.
R-R Record Info includes R-R Histogram, R-R Waveform and R-R Interval List.
When R-R Histogram, R-R Waveform or R-R Interval List is selected, it will be printed in the
ECG reports.
Grid of Report includes Thermal Report and USB Report.
When Thermal Report is selected, the grid will be printed while printing ECG reports with the
thermal recorder.
When USB Report is selected, the grid will be printed while printing ECG reports with a USB
printer.
NOTE:
1. The items of Auto Record Info are available only in the auto mode, and Template and
Position Marker do not work in the auto style of 3×4, 3×4+1R and 3×4+3R, and the
style of 6x2 and 6x2+1R in the Save Paper mode.
2. To get more information about the above contents, please refer to Section 8.6.1, “ECG
Reports in the Auto Mode”.
11.4 Patient Information Setup
Press Tab or Shift + Tab, or the Up, Down, Left or Right arrow to move the cursor. When the
cursor is on Patient Info on the System Setup screen, press to open the Patient
Information Setup window.