Product Manual

SE-1200 Series Electrocardiograph User Manual System Setup
- 116 -
When the paper with black markers on the bottom is used and Paper Marker is set to Ye s, the
device can identify the start point of each page of the recorder paper while printing ECG reports.
When Paper Marker is set to No, the device can not identify the start point of each page of the
recorder paper while printing ECG reports.
11.3.1.8 Setting Sampling Time
If Record Style is set to 12x1, you can set the time period. Press Tab or Shift + Tab to move the
cursor to the Sample Time textbox, and then input the time period manually.
If the time period is set from 11 to 24 seconds, in the auto mode, after pressing the
START/STOP key, the ECG waves of the set time period are printed.
NOTE: If the time period is set from 11 to 24 seconds, the ECG data sampled will not be
analyzed automatically or stored.
11.3.2 Setup 2
Press F1 or F2 to switch to the Setup 2 tab.
Figure 11-5 Record Info Setup2
Press Tab or Shift + Tab to move the cursor to an item, and then press Spacebar to select or
deselect the item.