Product Manual

SE-1200 Series Electrocardiograph User Manual System Setup
- 106 -
Figure 11-2 Work Mode Setup window
After setup, press to confirm, or press Tab or Shift + Tab to move the cursor to the
OK button, and then press to confirm. Then the System Setup screen appears.
11.1.1 Selecting Work Mode
Press Tab or Shift + Tab to move the cursor to a work mode, press Spacebar to select it, and then
a check mark √ appears in the box before the work mode.
NOTE: Only if a work mode is selected in the Work Mode Setup window, can the work
mode be selected by pressing the MODE key when the main screen is displayed.
MANU: In the manual mode, you can determine the lead group to be displayed and printed.
AUTO: In the auto mode, the lead groups are switched automatically according to the lead
sequence during the printing course. After the ECG waves of one lead group are printed
within a certain time, the system switches to print ECG waves of another lead group
automatically.
RHYT: In the rhythm mode, you can select rhythm leads to print 60s or 20s rhythm-lead ECG
waves.