Product Manual

SE-1200 Series Electrocardiograph User Manual Managing Files
- 99 -
If the U disk is not connected well, the hint U disk is not ready! will be displayed on the LCD
screen of the electrocardiograph, and then you should connect the U disk again. If the
electrocardiograph fails to export files, the hint Exporting fails! will pop up. After the
electrocardiograph successfully exports files, the hint Exporting succeeds! will be displayed.
NOTE:
1. Please insert the U disk or the SD card reader recommended by the manufacturer.
Please set the format to FAT or FAT32 when formatting the U disk.
2. The format of the exported files can be set to DAT/SCP/FDA-XML/PDF. For details,
refer to Section 9.2, “Exporting ECG Data to the U Disk Automatically”.
3. X can be set in the Device No. textbox in the Transmission Setup window.
4. If you select Delete After Trans. Or Export in the File Setup window, the files will be
deleted from the File Manager screen after they are exported.
10.3 Deleting Files
1. When the main screen is displayed, press the function key F7 below File to open the File
Manager screen1.
2. Press the function key F3 below Del All to display the following hint, press Tab or Shift +
Tab to move the cursor to the OK button, and then press
to delete all the files from
the electrocardiograph.
3. Or press the Up or Down arrow to highlight a file on the File Manager screen1, and then
press the function key F4 below Select to select the file and display the File Manager
screen2. Press the function key F5 below Delete to display the following hint, press Tab or
Shift + Tab to move the cursor to the OK button, and then press to delete the
selected file from the electrocardiograph.