Product Manual

SE-1200 Series Electrocardiograph User Manual Managing Files
- 98 -
If the wireless AP transmission is used, connect the PC to the server wireless AP, and
connect the electrocardiograph to the client wireless AP. Only the wireless AP
recommended by the manufacturer can be used.
2) Log into the FTP receiving software. The FTP port is 21.
3) Input the correct FTP path, FTP user name and password. Set Transmission Mode to
Ethernet. Set the IP addresses. For details, please see Section 9.1.3, “Transmitting ECG
Data in SCP/FDA-XML/PDF Format to the PC Through Net Cable”.
4) Press the function key F7 below File to display the File Manager screen1.
5) Press the function key F1 below Trans All to transmit all the files to the PC. After all the
files are transmitted, the following hint will pop up.
6) Or press the Up or Down arrow to highlight a file on the File Manager screen1, and then
press the function key F4 below Select to select the file and display the File Manager
screen2. Press the function key F3 below Trans to transmit the selected file to the PC.
10.2 Exporting Files to the U Disk
1. Insert the U disk recommended by the manufacturer to USB socket 2 of the
electrocardiograph.
2. When the main screen is displayed, press the function key F7 below File to open the File
Manager screen1.
3. Press the function key F2 below Export All to export all the files to the directory of
ECGDATA\ECG-X\Export\Examination Date and Time of the U disk.
4. Or press the Up or Down arrow to highlight a file on the File Manager screen1, and then
press the function key F4 below Select to select the file and display the File Manager
screen2. Press the function key F4 below Export to export the selected file to the directory
of ECGDATA\ECG-X\Export\Examination Date and Time of the U disk.