Product Manual

SE-1200 Series Electrocardiograph User Manual Managing Files
- 95 -
10.1.1 Transmitting DAT Files through Serial Cable
1. Connect the RS232 socket of the PC to the RS232 socket of the electrocardiograph with an
RS232 cable.
2. Or if the PC has no RS232 socket, connect the USB socket of the PC to the RS232 socket of
the electrocardiograph by using the RS232-USB assembly. For details of the RS232-USB
assembly, please refer to Section 9.1.1, “Transmitting ECG Data in DAT Format Through
Serial Cable”.
3. Log into the Smart ECG Viewer software.
NOTE: If you don’t connect the RS232 socket of the electrocardiograph to the PC, or you
do not log into Smart ECG Viewer before transmission, the following hint will pop
up.
4. Set Transmission Mode to UART in the Transmission Setup window. For details, refer to
Section 9.1.1, “Transmitting ECG Data in DAT Format Through Serial Cable”.
5. Press the function key F7 below File to display the File Manager screen1.
6. Press the function key F1 below Trans All to transmit all the files to the PC. After all the files
are transmitted, the following hint will pop up.
7. Or press the Up or Down arrow to highlight a file on the File Manager screen1, and then
press the function key F4 below Select to select the file and display the File Manager
screen2. Press the function key F3 below Trans to transmit the selected file to the PC.