Product Manual

SE-1200 Series Electrocardiograph User Manual Managing Files
- 94 -
CAUTION
1. When files are being printed, transmitted, deleted or exported, you can not turn off the
electrocardiograph.
2. Do not cut off the mains supply directly when no battery is installed in the device, or
else, the stored data may be lost.
10.1 Transmitting Files to the PC
NOTE:
1. To transmit DAT files to the PC, the Smart ECG Viewer software of the manufacturer
must be installed in the PC. You should log into the Smart ECG Viewer software
before transmission.
2. To transmit SCP/FDA-XML/PDF files to the PC, the FTP receiving software must be
installed in the PC. You should log into the FTP receiving software before
transmission.
3. By default, the ECG file format is DAT. You can activate SCP/FDA-XML/PDF function
on the Advanced Setup screen For details, refer to Section 9.1.3, “Transmitting ECG
Data in SCP/FDA-XML/PDF Format Through Net Cable”.
4. If you select Delete After Trans. Or Export in the File Setup window, the files will be
deleted from the File Manager screen after they are transmitted.
CAUTION
It is forbidden to connect or disconnect a U disk or a USB printer during the transmission
course.