Product Manual

SE-1200 Series Electrocardiograph User Manual Managing Files
- 92 -
Chapter 10 Managing Files
If you want to save the ECG data in the electrocardiograph, you should set Auto Save to On and
Saving Path to ECG. By default, Auto Save is On and Saving Path is ECG. Then the ECG
data in the auto, off or rhythm mode will be saved on the File Manager screen automatically.
To Set Auto Save to On and Saving Path to ECG
1. When the main screen is displayed, press the function key F6 below Setup to open the
System Setup screen.
2. Press Tab or Shift + Tab, or the Up, Down, Left or Right arrow to move the cursor to
File, press .
3. Press Tab or Shift + Tab to move the cursor to the Auto Save list box, and then press the
Up or Down arrow to select On. Press Tab or Shift + Tab to move the cursor to the
Saving Path list box, and then press the Up or Down arrow to select ECG.
4. Press , or press Tab or Shift + Tab to move the cursor to the OK button, and
then press .
5. When the System Setup screen is displayed, press ESC to return to the main screen.
To Switch to the File Manager screen 1/2
When the main screen is displayed, press the function key F7 below File to open the File
Manager screen1. Press the Up or Down arrow to highlight a file on the File Manager screen1,
and then press the function key F4 below Select to select the file and display the File Manager
screen2. Then press the function key F7 below Return to return to the File Manager screen1.
Press the function key F7 below Return on the File Manager screen1 to return to the main
screen.