Product Manual

SE-1010 PC ECG User Manual Preparations Before Operation
- 38 -
3. When the receiver is found, the address of DX12 receiver will be displayed on the screen in
10 seconds. Press to start up the Bluetooth connection. The Bluetooth connection
will be displayed on the main screen of DX12 transmitter and the Bluetooth status indicator
illuminates in kelly when DX12 transmitter and DX12 receiver are matched successfully.
The Bluetooth status indicator blinks when a data transmission builds between DX12
transmitter and DX12 receiver. The system will return to the previous menu if no DX12
receiver is found.
NOTE: Select the receiver address displayed in the PC ECG software when receiving
more than one addresses. For details, please refer to Section 9.3 “Device Setup”.
5.7.1 Keyboard Locking/Unlocking
If no operation is taken, the keyboard will be locked automatically in 8 seconds. If the previous
screen is the menu screen, it will return to the main screen after the keyboard is locked
automatically.
When the keyboard is locked, a prompt unlock will be displayed on the left bottom of the main
screen and an icon will be displayed on the top right.
When the keyboard is locked, press , and then press in 1.2 seconds to unlock the
keyboard.
When the keyboard is unlocked, press , and then press in 1.2 seconds to lock the
keyboard manually.