Product Manual

SE-1010 PC ECG User Manual Preparations Before Operation
- 32 -
1. Clean the electrode area on the chest surface with alcohol.
2. Daub the round area of 25mm in diameter on each electrode area with gel evenly.
3. Place a small amount of gel on the brim of the chest electrode’s metal cup.
4. Place the electrode on the chest electrode area and squeeze the suction bulb. Unclench it and
the electrode is adsorbed on the chest.
5. Attach all chest electrodes in the same way.
Chest Electrode (Only for C5 in Frank Lead System):
Snap/Banana Socket Adapter: Disposable Electrode:
Disposable Electrode Connection:
1. Connect the snap/banana socket adapter to the lead wire.
2. Connect the snap/banana socket adapter to the disposable electrode.
3. Clean the electrode area at the back midline with 75% alcohol.
4. Attach the disposable electrode to the electrode area at the back midline.
The quality of ECG waveform will be affected by the contact resistance between the patient and
the electrode. In order to get a high-quality ECG, the skin-electrode resistance must be minimized
while connecting electrodes.
WARNING
1. Make sure that all electrodes are connected to the patient correctly before operation.
2. Make sure that the conductive parts of electrodes and associated connectors,
including neutral electrodes, do not come in contact with earth or any other
conducting objects.
3. The disposable electrodes can only be used for one time.