Product Manual

SE-1010 PC ECG User Manual Assembling SE-1010 PC ECG System

- 24 -

Burglar Lock Assembly Drawing

For Resting ECG of wireless system,

1. Insert plug 1 of the patient cable into socket 2 of DX12 transmitter.

2. Insert plug 4 of the cable into socket 6 of DX12 receiver.

3. Insert plug 5 of the cable into the USB socket of the PC.

4. Connect a printer to the PC.

5. Insert the Sentinel into the USB socket of the PC.

6. Make sure that the above parts are properly connected, and then connect the PC, and the

printer to the power supply.

For Exercise ECG of wireless system,

1. Insert plug 1 of the patient cable into socket 2 of DX12 transmitter.

2. Insert DX12 transmitter into pocket 3 of DX12 belt, and then wear the belt around the

waist.

3. Insert plug 8 of the cable into socket 6 of the DX12 receiver.

4. Insert plug 9 of the cable into the USB socket of the PC.

5. Connect plug 10 of the cable to the BP monitor.

6. Connect a treadmill or an ergometer to the PC.

7. Connect a printer to the PC.

8. Insert the Sentinel into the USB socket of the PC.

9. Make sure that the above parts are properly connected, and then connect the PC,

treadmill/ergometer and printer to the power supply.

WARNING

1. Use a special grounded socket to get accurate voltage and current.

2. When using a laptop with a two-prong plug, please connect a grounded printer to

avoid power interference.

3. Only stress BP monitors can be used.