Product Manual

M3A Vital Signs Monitor User Manual SpO
2
Monitoring (Optional)
- 52 -
9.5 SpO
2
Setup Menu
9.5.1 SpO
2
Setup
Click on SpO
2
Setup in Main Menu to open the following menu:
Figure 9-2 SpO
2
Setup
 Pulse Volume: Set it to level 0 ~ 5.
 Pitch Tone: set it to ON or OFF.
 PI: If it is set to ON, the perfusion index will be presented on the main interface. If it is set to
OFF, the perfusion index is unavailable onscreen.
9.5.2 Alarm Setup Menu
Enter Main Menu > Alarm Setup, In the menu, the alarm for SpO
2
or PR can be turned on or
off, and the alarm limits can be adjusted. Select ON to enable alarm during SpO
2
monitoring;
select OFF to disable the alarm function, and will be displayed.
Set High for the higher alarm limit, and set Low for the lower alarm limit. If the measured value
is higher than the higher alarm limit or lower than the lower alarm limit, the monitor will give an
alarm.
Figure 9-3 Alarm setup