Product Manual

M3A Vital Signs Monitor User Manual Recording

- 44 -

1. Cut the paper from the feeding edge.

2. Open the recorder door.

3. Reload the paper and close the recorder door.

7.2 Outputing the Monitoring Data

By selecting the items on Main Menu > Recorder (Figure 7-1), you can output the real time data,

trend graph and trend table.

Figure 7-1

 Record Realtime Data: Select this item, and the recorder will output the real time data

including measurements and SpO

waveforms.

 Record Trend Graph: Select this item, and the recorder will output the trend graph.

 Record Trend Table: Select this item, and the recorder will output the trend table.

Press the buttom UP or DOWN on the front panel to select an item among the above-mentioned

items from the menu, and press on the front panel to confirm it. Subsequently, the

recorder will start outputting the monitoring data. Meanwhile, the selected item will be changed

into Stop Record as shown below:

Figure 7-2

You can stop the current recording process by select Stop Record on the menu.

NOTE:

Do not use the recording function when a low battery alarm occurs, or automatic

shutdown of the monitor may result.