Product Manual

M3A Vital Signs Monitor User Manual System Menu
- 33 -
 Net Setup
Access Net Setup and you can see the menu below:
Figure 4-19 Net Setup
 Bed No.: Set the bedside monitor number to a value from 1~64.
 Server IP
The default server IP is 202.114.4.119. It can be changed by the user according to the IP of
PC installed with MFM-CMS of EDAN.
 Server Port: Set the server port.
 Exit: Exit the menu.
Factory Maintenance
Factory maintenance function is only available for the service engineers of EDAN or
representative authorized by EDAN.
Version
Select Main Menu > Maintenance > About to check the version of the modules.
4.10 Standby Mode
Entering Standby Mode
When the monitor is on, press the ON/OFF button for less than 2 seconds, the dialog box
displays as follows:
Figure 4-20 Enter Standby Mode
Select YES to enter the standby mode.
In the following two conditons, the monitor can not enter standby mode.
1. If the monitor is measuring, press the ON/OFF button for less than 2 seconds, the following
dialog box displays: