Product Manual

M3A Vital Signs Monitor User Manual System Menu
- 27 -
Figure 4-7 General Setup
 Key Volume: set key volume to level 0 ~ 5.
 LCD Brightness: set LCD brightness to level 1 ~ 5.
 Standby Mode: set to ON or OFF. If you set this item to ON, when pressing ON/OFF
button for less than 1s, the monitor will enter Standby Mode. (Please refer to 4.10 Standby
Mode for more information.)
 Work Mode: set to Spot or Monitor.
4.8.2 General Alarm Setup
Figure 4-8 General Alarm Setup
 Alarm Volume: set alarm volume to level 1 ~ 5.
4.8.3 Time & Date Setup
Select Time & Date Setup in Main Menu to access the submenu as shown below. System time
is in format of yy-mm-dd, mm-dd-yy or dd-mm-yy. Users can set the year, month, day, hour,
minute and second. Select the item you want to modify and confirm it by pressing Confirm.
Select Cancel item to save the setup and return to the previous menu. If you want to exit the
menu without saving it, press the MENU button on front panel.