Product Manual

M3A Vital Signs Monitor User Manual System Menu

- 25 -

4.3 SpO

Setup

Please refer to 9.5.1 SpO

Setup for more information.

4.4 TEMP Setup

Please refer to 11.1.3.1 or 11.2.3 TEMP Setup for more information.

4.5 Alarm Setup

Select Alarm Setup in Main Menu to open submenu as shown below, in which the user may

turn on or off alarm or set the upper alarm limit or lower alarm limit.

Set the item to ON, the alarm system is turned on. Pressing the SILENCE button on the front

panel can stop the audio alarm or silence the audio system. If you set the item to OFF in this

submenu, the monitor will not give an alarm when an alarm is activated.

Figure 4-3 Alarm Setup

WARNING

1 If the user set alarm to OFF, the monitor will not give alarm prompts when an alarm is

activated, the user should use this function cautiously.

2 The user should check the alarm limit to ensure it is proper for each patient.

4.6 Data Management

Select Maintenance in Main Menu to open the following menu.

Figure 4-4 Data Management