Product Manual

M3A Vital Signs Monitor User Manual Intended Use and Safety Guidance
- 5 -
CAUTION
9 Before use, the equipment, patient cable and sensor should be checked.
Replacement should be taken if there is any evident defectiveness or aging symptom
which may impair the safety or performance.
10 The disposable accessories can not be reused.
11 Avoid liquid splash and excessive temperature. The temperature must be kept
between +5 and ℃ +40 while working. And it should be kept between ℃ -20 and ℃
+55 during transportation and storage.℃
12 If the monitor gets damp, put it in dry circumstance to dry it until it can work normally.
If liquid pours on the monitor, please contact the service personnel authorized by
EDAN.
13 Setting alarm limits to extreme values can render the alarm system useless.
14 A potential hazard may exist if different alarm presets are used for the same or similar
equipment in any single area.
NOTE:
1 Position the device in a location where the operator can easily see the screen and
access the operating controls.
2 The monitor can only be used on one patient at a time.
3 The equipment is calibrated to display functional oxygen saturation.
4 This equipment is not intended for family usage.
5 If the device is discolored or damaged, then discontinue use of the device.
6 The pictures and interfaces in this manual are for reference only.
7 Regular preventive maintenance should be carried out every two years. You are
responsible for any requirements specific to your country.
1.2.7 Explanation of Symbols on the Monitor
This symbol indicates that the instrument is
IEC/EN60601-1 Type BF equipment. The unit displaying
this symbol contains an F-Type isolated (floating) patient
applied part providing a high degree of protection against
shock, and is suitable for use during defibrillation.