User Manual

Redpi

ne Signals, Inc. Proprietary and confidential Page 7

RS9110

802.11bgn

WLAN

Module

Data Sheet

Version 1.4

1: D

etailed Feature List

: Host Interfaces

• SDIO

• Version 2.0-compatible

• Supports SD-SPI, 1-bit, and 4-bit SDIO modes

• Operation up to a maximum clock speed of 50 MHz

• SPI Interface

• Operation up to a maximum clock speed of 80 MHz

1.2: WLAN

1.2.1: MAC

• Conforms to IEEE 802.11b/g/n/e/i standards for MAC

• Dynamic selection of fragment threshold, data rate, and antenna

depending on the channel statistics

• Hardware accelerators for WEP 64/128-bit and AES

• WPA, WPA2, WPA2-Enterprise, Voice Personal, WPS (PIN/PBC),

• WMM and WMM-PS support

• AMPDU and AMSDU aggregation for high performance

• Firmware downloaded from host based on application

1.2.2: Baseband Processing

• Supports DSSS (1, 2 Mbps) and CCK (5.5, 11 Mbps) modes

• Supports all OFDM data rates (6, 9, 12, 18, 24, 36, 48, and 54 Mbps)

• Supports IEEE 802.11n single-stream modes with data rates up to 65

Mbps

• Supports long, short, and HT preamble modes

• High-performance multipath compensation in OFDM, DSSS, and CCK

modes

1.2.3: RF Transceiver

• Highly integrated 2.4 GHz transceiver with direct conversion architecture

• Receiver with 38 dB RF selectable gain range and 60 dB baseband variable

gain range

• Power amplifier with 17 dBm maximum output power

• Integrated LNA, BPF, and T/R switch

1.3: Multi-Threaded Processor

• RISC-based pipelined architecture

Compliance to inter-operability specifications based on the standards