User's Manual

SE-1200 Pro&SE-1201 Pro Electrocardiograph User Manual EMC Information
- 65 -
Appendix 2 EMC Information
Electromagnetic Emissions
Guidance and manufacturer’s declaration - electromagnetic emission
The SE-1200 Pro&SE-1201 Pro ECG is intended for use in the electromagnetic environment
specified below. The customer or the SE-1200 Pro&SE-1201 Pro ECG user should ensure that it is
used in such an environment.
Emission test
Compliance
Electromagnetic environment - guidance
RF emissions
CISPR 11
Group 1
The SE-1200 Pro&SE-1201 Pro ECG uses RF
energy only for its internal function. Therefore,
its RF emissions are very low and are not likely
to cause any interference in nearby electronic
equipment.
RF emission
CISPR 11
Class A
The SE-1200 Pro&SE-1201 Pro ECG is suitable
for use in all establishments other than domestic
and those directly connected to the public
low-voltage power supply network that supplies
buildings used for domestic purposes.
Harmonic emissions
IEC/EN 61000-3-2
Complies
Voltage fluctuations/
flicker emissions
IEC/EN 61000-3-3
Complies
NOTE:
The EMISSIONS characteristics of the system make it suitable for use in industrial areas and
hospitals (CISPR 11 class A). If used in a residential environment (for which CISPR 11 class B is
usually required), the system might not offer adequate protection to radio-frequency communication
services. The user might need to take mitigation measures, such as relocating or re-orienting the
equipment.